Asphalt Roofing in Leadingcross Green - Installation & Repair Costs

Asphalt roofs require very little maintenance, so all that really needs to be done is to remove leaves and debris from them whenever it begins to build up.

It is installed by laying flashing on a newly cleaned roof and followed by attaching the shingles into place with felted tar and then finally securing them with nails. It sounds simple, but it is best done by professionals.

Yes, on small projects like sheds and carports, but for larger projects like home roofs, it is a job that is better left to the professional. One misplaced shingle can leave you with a whole world of water damage.

Asphalt roofs are very durable, and can last anywhere from 20 to 30 years. They do require routine maintenance to patch cracks and other imperfections and prevent leaking.

The main reason why it is more expensive than some other types of roofing is because, when installed correctly, it can be expected to last a lot longer. Another benefit of this type of roofing is that very little maintenance is required to keep it in good condition for as long as possible.

Yes, it comes in a variety of colours, finishes, and textures. This means that you’ll have plenty of options available when it comes to customizing the exterior of your home, whether you choose a poured asphalt roof or shingles.

This will depend on the shingle type and manufacturer. In every case, these shingles are designed to be overlapped to provide adequate protection from the elements. However, whereas some shingles must be overlapped in very specific ways, others provide some flexibility. This can allow your roofing contractor to create unique patterns on your roof with the shingles, creating the aesthetic look you want.

It is known for its ease of installation and low cost, which makes it quite popular among many homeowners. However, it’s important to consider that a new asphalt roof lasts an average of 25 years. During this time, the roof will require maintenance and repairs.

The cost involved will depend on the size of your roof, whether it’s a pitch or flat roof and whether asphalt tiles or sheets are used. Our network of Kent roofing contractors will be able to provide you with an estimate of costs before starting work though.

In most cases, it is not recommended that you perform DIY pressure cleaning on a roof, as it can result in leaks developing. Always hire a reliable Leadingcross Green roof cleaning company to perform tasks like these.

The quantity of shingles needed will depend on the size of your roof and the size of the shingles being used. Asphalt shingles are available in several different size, colour and style options, so a professional roofer will be able to calculate the amount needed.

When purchasing asphalt shingles, it’s strongly recommended that extra units be purchased at the same time. This will allow you to replace individual shingles if any of the break or become damaged over time – without making your roof look unsightly.

Yes. This often forms part of an asphalt roof’s fire protection resistance rating, and it doesn’t cost a lot to have it installed at the time of having the shingles placed.

A few aspects would need to be considered before providing a direct answer to this question:

1. Is the current roof layer relatively flat? If not, the new layer of shingles will look distorted and out of place
2. Are there any existing structural limitation or problems, such as sagging? If so, the roof will most likely not handle the weight of two layers of shingles without collapsing

In most cases, you will be able to have solar panels installed on your asphalt roofing. However, it’s crucial that they be professionally installed to prevent leaking and damage. All screws, brackets and bolts that are placed into the asphalt shingles must be properly sealed to prevent water leaks from occurring.

Your new shingles will need to receive sufficient warmth from the sun so that the sealer on them can be fully activated. The amount of time this will take depends on where your home is situated, its roof slope and direction and climatic conditions in the immediate area.

Although the sealant in asphalt roofing does an excellent job of keeping the shingles together and preventing leaks, it is possible to separate them with a flat bar if a roofer knows how to work carefully. However, this process is best done during the cooler times of year.

Once the bond between the shingles has been carefully separated, nails can be removed so that repairs or adjustments can be made. However, it’s crucial to ensure that all lifted shingles are manually re-sealed with asphalt plastic cement or a similar alternative product.